welcome to the intercom zone, please find the information you need, we provide: software, the latest information. Our son & daughter of Indonesia, working for the world in our field <-|-> Perhatian, sekarang kami intercom zone bisa di akses melalui handphone di http://intercomzone.blogspot.com/?m=1 untuk kritik dan saran, anda bisa kirimkan ke e-mail : intercomzone@live.com atau Pada Request Pada Di bawah Ini, Terima Kasih -|- Attention, we now intercom zone can be accessed via cell phone at http://intercomzone.blogspot.com/?m=1 to criticism and suggestions, you can send to your e-mail: intercomzone@live.com or On Request At Under It, Thank You.
VIA 4SHARED(Download Software)|e-Mail : intercomzone@live.com|PASSWORD :adminfree

Cara setting modem Telkom Speedy



Informasi setting modem yang digunakan untuk layanan Telkom Speedy
Adsl Modem SMC
Default IP: 192.168.2.1
Default password: smcadmin
Setting Bridge:
 
  • Klik WAN
  • Clik ATM PVC
  • Klik VCI
  • Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR, PCR/SCR/MBS: 4000/4000/10
  • Klik Save Settings


Setting PPPoE:


  • Klik WAN
  • Clik ATM PVC
  • Klik VCI
  • Protocol: PPPoE, VPI/VCI: 8/81, Encapsulation: LLC, QoS Class: UBR, PCR/SCR/MBS: 4000/4000/10, IP assigned by ISP: Yes, IP Address: 0.0.0.0, Subnet Mask: 0.0.0.0, Connect Type: Always Connected, Idle Time (Minute): 5, Username: nmrspeedy@telkom.net, Password: (password dari telkom), Confirm Password: , MTU: 1492
  • Klik Save Settings

Adsl Modem ZyXeL
P-660R
Default IP: 192.168.1.1
Default username: admin
Default password: 1234
Setting Bridge
 
  • Pilih Network
  • Pilih WAN
  • Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply
  • Pilih Maintenance
  • Pilih Tools
  • Restart

Setting PPPoE
 
  • Pilih Network
  • Pilih WAN
  • Mode: Routing, Encapsulation: PPPoE, Username: ( nmrspeedy@telkom.net), Password: (password speedy), Service Name: Speedy, Multiplexing: LLC, VPI: 8, VCI: 81, IP Address: Obtain an IP Address Automatically, Connection: Nailed-Up Connnection, Apply
  • Klik Maintenance
  • Klik Tools
  • Restart

Adsl Modem Shiro
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:
 
  • Klik Advanced
  • Klik WAN
  • Klik New Connection
  • Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit
  • Save Settings
  • Restart Router


Setting PPPoE:


  • Pilih Advanced
  • Klik WAN
  • Klik New Connection
  • Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit
  • Save Settings
  • Restart Router


Adsl Modem Aztech
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge
 
  • Klik Advanced
  • Pilih WAN
  • Klik New Connection
  • Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit.
  • Save Settings
  • Restart

Setting PPPoE/Router:
 
  • Klik Advanced
  • Pilih WAN
  • Klik New Connection
  • Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit.
  • Save Settings
  • Restart

Adsl Modem TECOM
AR1031
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:
 
  • Klik Advanced Setup
  • Klik WAN
  • Klik Edit
  • ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  • Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
  • Cheklist Enable Bridge Service, Service Name: Speedy, Next
  • WAN Setup - Summary, Save
  • Save/Reboot


Setting PPPoE:


  • Klik Advanced Setup
  • Klik WAN
  • Klik Edit
  • ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  • Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
  • Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
  • Cheklist Enable WAN Service, Service Name: Speedy, Next
  • WAN Setup - Summary, Save
  • Save/Reboot


Modem Prolink


  • Login To -> http:// 10.0.0.2
    User Name: admin
    Password: password
    Klik . . . . OK
  • Chose Configurasi WAN:
  • Select Adapter: Pilih Pvc3 (Indonesia)
  • Edit Field:
    Bridge = Enable
    Encapsulation = 1483 Bridge IP LLC
    ATM VPI = 8
    ATM VCI = 81
  • Static IP Setting: � just blank �
    IP Address = just empty
    Subnet Mask = just empty
    Gateway = just empty
    User Name = username@telkom.com. . . . . . ( optional ) *
    Password = xxxxxxxx . . . . . . . . . . . . . . . . . . .( optional ) *
    * If you choose to put username & password there just double clik explorer
    * If you not choose to put username & password there you have to create new connection at Network Connection
  • Create New Connection (Bridge) See here..>>
  • Than Next:
  • * Klik Submit
  • * Klik Save Configuration
  • Next: Save Reboot ....

Adsl Modem D-Link
DSL-302T
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:
 
  • Klik Setup
  • Klik Connection
  • Bridge Connection Setup. Name: Speedy; Type: Bridge; Encapsulation: LLC; VPI=8; VCI=81, Apply
  • Klik Tools
  • Klik System Commands, Save All, Restart


Setting PPPoE/Router:


  • Klik Setup
  • Klik Connection
  • Bridge Connection Setup. Name: Speedy; Type: PPPoE; Username: nmrspeedy@telkom.net; Password: (password dari telkom); VPI=8; VCI=81, Apply
  • Klik Tools
  • Klik System Commands. Save All, Restart


adsl Modem Repotec


  • Buka Internet Explorer ketik: http://192.168.1.1
  • Username: admin & Password: epicrouter
  • Klik: OK
  • Klik WAN
  • Pic Adapter: Pvc0
  • Klik Submit
  • Virtual Circuit = Enabled
  • Bridge & IGMP = Disable
  • Each region was different from another region and for Bandung vpi:8 , vci: 81
  • Service Category = UBR without PCR
  • Protocol/Conection type = PPPoE
  • Encapsulation = LLC/Snap-Bridging
  • Put Username & Password from your provider
  • Klik Submit.
  • Klik Save Configuration (wait till Saving configuration done.)
  • put DNS: 202.134.0.155 & 202.134.2.5

Adsl Modem Dareglobal
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:
 
  • Klik Advanced Setup
  • Klik WAN
  • Find VPI/VCI: 8/81, Klik Edit
  • ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  • Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
  • Cheklist Enable Bridge Service, Service Name: Speedy, Next
  • WAN Setup - Summary, Save
  • Save/Reboot
  Setting PPPoE:


  • Klik Advanced Setup
  • Klik WAN
  • Cari VPI/VCI: 8/81, Klik Edit
  • ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  • Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
  • Put your PPP Username: Nomorspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
  • Centang Enable WAN Service, Service Name: Speedy, Next
  • WAN Setup - Summary, Save
  • Save/Reboot

Adsl Modem TP-Link
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:
 
  • Klik Advanced Setup
  • Klik WAN
  • Find VPI/VCI: 8/81, Klik Edit
  • ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  • Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
  • Cheklist Enable Bridge Service, Service Name: Speedy, Next
  • WAN Setup - Summary, Save
  • Save/Reboot


Setting PPPoE:


  • Klik Advan
  • ced Setup
  • Klik WAN
  • Find VPI/VCI: 8/81, Klik Edit
  • ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  • Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
  • Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
  • Cheklist Enable WAN Service, Service Name: Speedy, Next
  • WAN Setup - Summary, Save
  • Save/Reboot

Setting Modem Articonet ACN-100R dan ACN-110
Cara melakukan setting di komputer untuk akses ke modem Articonet.
Untuk setting di komputer dilakukan sesuai dengan operating system yang dipakai di komputer pelanggan, disini yang dibahas khusus untuk Windows XP.
Lakukan network setting di PC (komputer) sbb:
a. Start � Control Panel � Network Connection
b. arahkan kursor pada Local Area Connection yang aktif, kemudian klik kanan dan pilih properties
c. kemudian pilih menu Internet Protocol (TCP/IP) dan klik 2X, maka akan muncul menu General.
d. Pilih Obtain an IP Address Automatically kemudian pilih Obtain DNS server address automatically, kemudian tekan tombol OK.
Panduan cara setting modem ADSL Speedy koneksi PPPoE.(PPPoE)
Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
Masukkan username dan password: admin/admin
Setelah masuk ke menu setting lakukan langkah berikut:
Masuk ke menu "Advanced Setup" kemudian pilih "WAN" dan klik tombol "Edit" disebelah kanan tabel WAN Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
VPI = X
VCI = XX
Service Category = UBR Without PCR, kemudian klik tombol Next
Connection type = PPPoE
Encapsulation = LLC, kemudian klik tombol Next
Masukkan username dan password Speedy, kemudian klik tombol Next
Tandai atau kasih v untuk pilihan "Enable WAN Service", kemudian klik Next dan klik tombol Save
Setting PPPoE untuk koneksi Speedy telah selesai dilakukan
Selanjutnya klik tombol Save/Reboot
(Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)

Berikut langkah setting modem ADSL Articonet untuk Dial-Up/Bridge.
Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
Masukkan username dan password: admin/admin
Setelah masuk ke menu setting lakukan langkah berikut:
Masuk ke menu "Advanced Setup" kemudian pilih "WAN" dan klik tombol "Edit" Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
VPI = X
VCI = XX
Service Category = UBR Without PCR, kemudian klik tombol Next
Connection type = Bridging
Encapsulation = LLC, kemudian klik tombol Next
Tandai atau kasih v untuk pilihan "Enable Bridge Service", kemudian klik Next dan klik tombol Save
Setting Bridge untuk koneksi Speedy telah selesai dilakukan
Selanjutnya klik tombol Save/Reboot
(Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)
Setting modem Articonet untuk koneksi Bridging sudah selesai, langkah berikutnya setting koneksi Dial-Up di PC/komputer.
Panduan instalasi Dial Up koneksi ADSL menggunakan Windows 2000:


  • Klik Start, klik Setting,klik Control Panel,
  • Klik Network and Dial Up Connections.
  • Klik Make New Connection, klik Next,
  • Klik Dial Up to the Internet
  • Klik I want to setup my internet manually, klik Next
  • Klik I connect through a phone line and a modem klik Next
  • Pilih dan klik modem ADSL yang sesuai
  • Isi username:15xxxxxxxxxx@telkom.net
  • Password: xxxxxxxx
  • Klik OK dan Lanjutkan sesuai perintah yang muncul
  • Klik Finish
  Panduan installasi Dial Up koneksi ADSL menggunakan Windows Xp:


  • Klik Start, klik Setting, klik Control Panel.
  • Klik Network Connection
  • Klik Create a New Connection, klik Next.
  • Klik Connect to the Internet, klik Next
  • Klik Setup my connection manually, klik Next
  • Klik Connect Using Dial Up, klik Next
  • Klik modem ADSL yang sesuai, klik Next
  • Isi username: 15xxxxxxxxxx@telkom.net dan Password: *******
  • Confirm password: xxxxxxxx
  • kemudian beri tanda v pada pilihan "Add a shortcut to the desktop screen"
  • Klik Finish
info intercom zone
VIA 4SHARED (Download Software) | e-Mail : intercomzone@live.com | PASSWORD :adminfree
intercom zone - New! - Access intercom zone of your phone, just type: http://intercomzone.blogspot.com/?m=1 http://translate.googleapis.com/translate_static/img/loading.gif

Rocket Chiken

Rocket Chiken
Solusi, Makanan Cepat saji,, enak dan Murah , pas untuk Kantong pelajar

Pilih Katagori

TRANS~CORP © Intercom Zone